Terms and Conditions of Use
Welcome to the aosco.com website. This website is owned and operated by AOS
Thermal Compounds, with its office address: 22 Meridian Road, Suite #6, Eatontown,
New Jersey 07724 (“we,” “us” or “our”).
Visitors to the aosco.com website are bound by the terms and conditions set out
below. By progressing beyond this screen and by using the aosco.com website, you
are deemed to accept them. Our Privacy Statement governs the use of any personal
data that you provide to us via this website.
Unless specified otherwise, references in this website to "AOS Thermal Compounds"
or to "AOS" shall mean AOS Thermal Compounds and any of its subsidiaries
and affiliates.
Our Liability to You
AOS Thermal Compounds is providing this website on an "as is" or "as
available" basis, and makes no representations or warranties of any kind
with respect to this website or its contents, including, but not limited to, the
implied warranties of merchantability, fitness for a particular use or non-infringement.
The information contained in this website is not comprehensive. Despite our efforts,
it may not be accurate, up to date or applicable to your particular circumstances.
AOS Thermal Compounds cannot accept any liability for any inaccuracies or omissions
in this website and any decisions you make based on information contained in this
website are your sole responsibility.
AOS Thermal Compounds does not accept liability for any direct, indirect, special,
consequential or other loss or damage of whatsoever kind arising out of access
to, or the use of this website or any information contained in it.
The downloading of material from this website is done at your own risk. AOS
Thermal Compounds does not guarantee or warrant that such materials are free of
viruses, worms, Trojan horses or other destructive codes. It is your sole responsibility
to implement safeguards to protect your computer system and data, and you are
responsible for the entire costs of any service, repairs or corrections necessary
as a result of the use of this website.
The limitations and exclusions set out in this website shall apply to the fullest
extent permitted by applicable law.
Product Information
Where we have provided information about AOS Thermal Compounds’ products
on this website including, but not limited to, product data sheets, material safety
data sheets, and technical data sheets, all reasonable care has been taken to
ensure that this information is accurate as of the date of issue of such documents.
Nevertheless, such information may be affected by changes subsequent to the date
of issue in the blend formulation, methods of application of any of the products
referred to or in the requirements of any specification approval relating to any
such products. The properties and specifications of AOS Thermal Compounds’
products may vary, so please contact us before using any products in a manner
other than as directed. For the avoidance of doubt, liability for product information
on this website shall be governed by the terms of the “Our liability to
you” section above.
Use of Any Hyperlink
AOS Thermal Compounds is not responsible for the content of any other website,
including any website through which you may have gained access to our website
or to which you may gain access from our website. We do not accept any liability
in connection with any such sites or links.
Where we provide a hyperlink to a third party's website, we do so because we believe
in good faith that such a website contains or may contain material which is relevant
to that on our website. Such a hyperlink does not signify that AOS Thermal Compounds
has reviewed or has approved of the connected third party's website or its contents
– indeed, in certain instances, a hyperlink may connect you to a third party's
website containing views contrary to those expressed on our website or otherwise
held by AOS Thermal Compounds.
Trademarks
The AOS Thermal Compounds’ logo, Micro-Faze® and Sure-Form® are
registered trade marks of AOS Thermal Compounds. All other trade marks, product
names, and company names or logos used in this website are the property of either
AOS Thermal Compounds or their respective owners. No permission or license (whether
express or implied) is hereby granted regarding the use of any such trade marks,
product names, logos or titles, and such use may constitute infringement of the
holder’s rights.
Copyright
The copyright in the contents and any downloads from this website is owned by
AOS Thermal Compounds, 22 Meridian Road, Suite #6, Eatontown, New Jersey 07724.
You are responsible for obeying all applicable copyright laws. We permit you to
make copies of this website as necessary incidental acts during your viewing of
it, and you may take a print for your personal use of so much of the website as
is reasonable for private purposes. All other use is strictly prohibited. You
may not frame this site or link to a page other than the home page without our
express written permission.
Non-Personal Information
Other than personal information which will be treated in accordance with our Privacy
Statement, if you provide information to us, you agree that we have unlimited
rights to such information and that we may use such information in any way we
choose. Such information shall be deemed to be non-confidential.
Changes to this website
The information, material and content provided in the pages of this website may
be changed at any time without notice. Changes may also be made to the terms and
conditions or our Privacy Statement at any time. You agree to review the terms
and conditions and Privacy Statement regularly and your continued access to or
use of this website will mean that you agree to any changes.
What Law Governs This Website?
Your use of this website and downloads from it, and the operation of these terms
and conditions, shall be governed in accordance with the laws of the State of
New Jersey. The courts of New Jersey shall have exclusive jurisdiction over any
dispute arising out of your use of this website.
In the event that any or any part of the terms contained in these terms and conditions
or Privacy Statement shall be determined by any competent authority to be invalid,
unlawful, or unenforceable to any extent, such terms shall to that extent be severed
from the remaining terms which shall continue to be valid and enforceable to the
fullest extent permitted by law.
|
