| Tests |
Test Methods |
Silicone
54013 |
Silicone HTC
54010 |
Silicone HTC-61
54012 |
XT
54011 |
Application
Advantage |
|
Silicone thermal grease |
High thermal conductivity |
For superior thermal conductivity |
Operating range to 350°C (482°F) |
| Appearance |
Visual |
White Paste |
Off-White Paste |
Gray Paste |
White Paste |
| Consistency - Penetration
|
ASTM D-217 |
250-350 |
250-350 |
250-350 |
250-350 |
Specific Gravity
@ 25°C |
ASTM D-70 |
2.2 |
2.7 |
2.4 |
2.4 |
Bleed, 24 hrs %/Wt.
150°C
200°C
300°C |
FTM-321 (Modified) |
nil
0.50
- |
nil
0.30
- |
nil
0.30
- |
nil
0.20
nil |
Evaporation, 24 hrs %/Wt.
150°C
200°C
300°C |
FTM-321
(Modified) |
nil
0.50
- |
nil
0.30
- |
nil
0.40
- |
-
0.50
- |
Thermal Conductivity,
@ 36°C
CAL/SEC, CM °C
BTU.IN/(HR.Ft(Sq).°F)
W/m. °K |
Hot Wire Method Per MIL-C-47113 |
17.5x10-4
5.1
0.73 |
43.5x10-4
12.64
1.82 |
61.6x10-4
17.9
2.58 |
18.7x10-4
5.4
0.78 |
| Thermal Resistance, (°C/w) |
0.001 inch film w/
area of 1 sq inch |
0.05 |
0.025 |
0.01 |
0.07 |
Dielectric Strength
Volts/Mil |
ASTM
D - 149 |
400 |
343 |
339 |
301 |
Dielectric Constant
1000 Hz @ 25°C |
ASTM
D - 150 |
4.90 |
5.14 |
5.07 |
3.98 |
Dissipation Factor
1000 Hz @ 25°C |
ASTM
D - 150 |
0.0011 |
0.0031 |
0.0028 |
0.0020 |
Volume Resistivity
OHM - CM |
ASTM
D - 257 |
1.96x1015 |
3.36x1013 |
1.42x1014 |
5.59x1013 |
| Operating Range, °C
|
- |
-55 to 205°C |
-55 to 205°C |
-55 to 205°C |
-40 to 250°C |
Flow Rate
grams/min. |
AOS
Method |
18 to 20 |
2 to 15 |
2 to 15 |
2 to 5 |