AOS Thermal Compounds  
 
Sure-form® - Gap Filler Material
Sure-form®
Description Suggested Applications Configurations

Configurations & Properties

SURE-FORM is available in sheets and can be die-cut to exact specifications ranging in thickness from 0.08" (2mm) and higher. The product is also available in standard grease form.

The thermal properties in the chart below have been derived from various testing methodologies. Please learn more about AOS's committment to accurate testing data and procedures in our Research & Development section.
 
Physical Properties Value Test Method
Composition Non-Silicone   
Color Gray  
Density 2.8 ASTM D-70
Thickness, inch (mm) 0.08(2mm) & up  
Operating Temperature Range -40°C to 150°C  
Thermal Conductivity, W/m°K 1.68 ASTM E-1530
Thermal Resistance, °C-in2/w/mil 0.03  
Coefficient of Thermal Expansion 31.8x10-6/°C  
Dielectric Strength, V/mil 318 ASTM D-149
Volume Resistivity, ohm-cm 2.15x1015 ASTM D-257

** Kapton® is a registered Trademark of Dupont
Micro-Faze® is a registered trademark of AOS Thermal Compounds.

 

© 2007 AOS Thermal Compounds. All rights reserved.
 		 Terms of Use | Privacy Statement

Micro-Faze® is a registered trademark of AOS Thermal Compounds and is patent #6,475,962 B1.
Sure-Form® is a registered trademark of AOS Thermal Compounds.
22 Meridian Road, Suite #6, Eatontown, NJ 07724
P (732)389-5514 | F (732)389-6380
 		 Web Design: Steve Bailey